Manual Hand Crank Tarp System

• Hand crank tarp system kit: built for dump truck body and dump trailer. Heavy duty vinyl coated tarp or mesh tarp and retention bow can be applied. (sold separately)
• mounting hardware and spares included.
• Tough aluminum tarp roller axle telescope to your truck bed size, adjustable from 60'' to the maximum 104''. 
• Folding hand crank with protective rubber handle and strong locking gear detent makes crank handle secured
• Detent level locking device to keep the tarp from unrolling during transportation 
• No need to drill or removing roller axles to install heavy-duty tarp, tarp can be installed by inserting bolts into brass grommets and roller slot
•  Anti-sail retention bow can be applied at the rear (sold separately)

1. Standard Size:

• Min width 5ft. 9in.
• Max width 8ft. 6in.

Details:

1.Mounting hardware with locking gear detent

2.Tarp system, Anti-sail retention bar and mesh tarp with double pockets application

Instructions:

• to unlock the roller and unwrap the tarp, pull the tarp to the back of the truck or trailer bed.  To use anti-sail retention bar to secure it or use the rope to secure it at the back, stop it rolling during transportation.
• Go to the hand crank roll and tighten the tarp by locking up the locking gear detent level
• To uncover your load, unwrap the rope or unlock anti-sail retention bar, then go to the hand crank roller and roll in your taro and lock the locking gear detent level

1. Dump truck and dump trailerapplications
2. Tough extended aluminum tarp roller axle telescope
3. Anti-sail retention bar, mesh tarp orwaterproof vinyl coated tarp sold separately